Huawei MA 5603T

portfolio
portfolio
اطلاعات پروژه
  • دسته بندی: Huawei OLT 5603T
جزئیات پروژه

Huawei SmartAX MA5603T multi-service access module which can be used as the medium-capacity gpon olt, ip deslam and msan       Appearance The MA5603T has a fan tray at the left. The service subrack is installed in the cabinet through the mounting brackets. Figure 1 Appearance of the MA5603T service subrack(xDSL) Figure 2 Appearance of the MA5603T service subrack(GPON) Physical Specifications This […]

جزئیات بیشتر در مورد پروژه

Huawei SmartAX MA5603T multi-service access module which can be used as the medium-capacity gpon olt, ip deslam and msan

 

 

 

Appearance

The MA5603T has a fan tray at the left. The service subrack is installed in the cabinet through the mounting brackets.

Figure 1 Appearance of the MA5603T service subrack(xDSL)
Figure 2 Appearance of the MA5603T service subrack(GPON)

Physical Specifications

This topic provides the dimensions, weight, and power consumption of the MA5603T service subrack.

Dimensions and Weight

Table 1 Dimensions and weight of the MA5603T

ItemSpecification
Dimensions (W x D x H, excluding mounting brackets)442.00 mm x 283.20 mm x 263.90 mm
Dimensions (W x D x H, including mounting brackets of 19-inch standard)482.60 mm x 283.20 mm x 263.90 mm
Dimensions (W x D x H, including mounting brackets of ETSI standard)535.00 mm x 283.20 mm x 263.90 mm
Weight (empty service subrack)7.00 kg

Configuration

This topic provides the configuration of the boards in the MA5603T service subrack, and lists the type of the boards.

H801MABO and H802MABO are the backplanes supported by the MA5603T. H801MABO does not support the Vectoring feature, and H802MABO supports the Vectoring feature.

Figure 1 Configuration of boards in the MA5603T service subrack

Table 1 lists the configuration of boards in the MA5603T service subrack.

 
Slot TypeSlotSupported BoardRemarks
Control board (SCU) slot6,7Control boardTwo slots must be configured with the same control board. You are advised to configure 2 control boards working in active/standby mode.
Uplink interface board (GIU) slot8,9Uplink interface boardMixed configuration of upstream interface boards is supported; however, it is recommended to use the same upstream interface board in the configuration.
Filler Panel9Reserved
Power board slot10,11Power boardIt is recommended to configure the same power board in the two slots.
Universal interface board (GPIO) slot12
  • Universal interface board
  • Vectoring processing board
Service board slot0-5
  • Service board
    • SPU board
    • Ethernet service access board
    • TDM service processing board
    • GPON service board
    • 10G GPON service board
    • P2P interface board
    • ATM interface board
    • DSL&POTS Combo board
    • Voice board
    • ADSL2 service board
    • VDSL2 service board
    • SHDSL service board
  • SPL board
    • ADSL2 SPL board
    • VDSL2 SPL board
  • Extension board

Power Supply:

Table 2 Power specifications of the MA5603T

ItemSpecification
Power supply modeDC (dual power for backup)
Rated voltage-48 V / -60 V
Working voltage range-38.4 V to -72 V
Maximum input current20 A

MA5603T Fan Tray(FMCA)

A fan tray functions heat dissipation, monitoring, and fan speed adjustment, which ensures that the device works at a stable temperature.

Appearance

Six fans are configured in the fan tray (FMCA) of the MA5603T.

Specification

ItemSpecification
Dimensions (W x D x H)53.0 mm x 272.5 mm x 245.7 mm
Weight2.0 kg
Power consumption (including FMCA board)
  • Static: 30 W
  • Maximum: 72 W
Function:The functions of the fan tray are as follows:

  • Heat dissipation

    The fan tray is at the left of the service subrack and blows air for heat dissipation of the service subrack. The cool air flows to the subrack from the left of the subrack and then is exhausted from the right of the subrack after passing the boards.

  • Monitoring

    The fan tray is configured with a fan monitoring board. The fan monitoring board transmits speed adjustment signals to the fan tray, collects the rotating speed signals of the fans, and reports the rotating speed signals to the control board.

  • Speed adjustment

    The rotating speed of the fans can be adjusted according to the detected temperature automatically or be adjusted by software manually.

Power Consumption

Table 3 Power consumption of the MA5603T service subrack (Unit: W)

Typical ConfigurationStatic power consumptionMaximum power consumptionTypical power consumptionBoard configuration
ADSL2189.84606.55398.195H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805ADPD*6
VDSL2267.84702.55485.195H801SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H80BVDPM(17a)*6
POTS213.84396.55305.195H801SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H808ASPB*6
P2P537.84810.55674.195H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H802OPGD*6
GPON (H805GPBD)375.84504.55440.195H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805GPBD*6
GPON (H806GPBH)309.84486.55398.195H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H806GPBH*6
GPON (H802SCUN H805GPFD)273.84510.55392.195H802SCUN*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805GPFD*6
GPON (H801SCUH H805GPFD)391.84678.55535.195H801SCUH*2 H801X2CS*2 H801CITD H801PRTE*2 H801FCBI H805GPFD*6

کلیدواژه خود را وارد کنید